Tii 91 Series Bedienungsanleitung PDF herunterladen

P/N 92215701 • Rev C• 4/1/2008

Warranty: If this unit fails during the warranty period, contact tii customer service to authorize return. Unit may be returned prepaid.

Model tii 91 Series

Expansion Modules

Installation Note

Description

1. The tii 91 Series Expansion Modules consist

of a single station protector and a customer

bridge module required to upgrade or expand

subscriber lines within a tii Network Interface

Device (NID). They are available with either

traditional binding post terminations or gel-

sealed IDC terminations.

Features

Figure 1

Figure 2

Installation

Installing the Protector

1. The Angle Driver (Sealed IDC Protector) is

delivered with a universal grounding and

mounting tab (See Figure 1). If installing a

new module into a NID, break away the

unwanted ground tab from the module using a

pair of pliers and discard (See Figure 3).

Binding post protectors do not require this

step. Simply Install the module on desired

NID ground post and secure with washer and

nut.

Figure 3

Wiring

Angle Driver Sealed IDC Protector

1. The two upper ports of the Angle Driver are

intended to terminate subscriber (customer)

wires. Telco drop (feeder) wires must be

terminated in the two lower ports of the Angle

Driver.

2. Upper Port Subscriber Connections

(See Figure 4)

Subscriber terminations are already made in

the factory. If it is necessary to re-terminate a

subscriber wire, do so as follows:

2a. Do not strip wire insulation. Make certain

wire ends are cut flush with insulation.

NOTE: RJ-11 PLUG IS

NOT REQUIRED FOR

NORMAL OPERATION.

1 2 3

Inhaltsverzeichnis

Seite 1 - Installation Note

P/N 92215701 • Rev C• 4/1/2008 Warranty: If this unit fails during the warranty period, contact tii customer service to authorize return. Unit may be

Seite 2 - Installation

2b. Unscrew Angle Driver screw to the full upright position. 2c. Fully insert the two subscriber wires into their respective tip and ring (color-coded

Seite 3 - Testing

12. Terminate additional pairs to rockers as required. 13. Assure all rockers are in the down position and close customer security cover. CBM Wiring (

Kommentare zu diesen Handbüchern

Keine Kommentare

Tii 91 Series Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Tii 91 Series herunter. Tii 91 Series User Manual [en] [de] [it] [es] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Tii 91 Series